6
1.2 Safety instructions
For safety reasons, installers are responsible for familiarizing themselves with the
contents of this document and all warnings before performing installation.
1.2.1 General safety precautions
which can be extremely dangerous.
install in places where explosive gas or chemicals are present.
The utility grid, solar input, and battery voltage must be disconnected from the
Battery Pack is not user serviceable. High voltage is present in the device.
The electronics inside the Battery Pack are vulnerable to electrostatic discharge.
Be sure to be grounded before handling the Battery Pack.
Read the label with Warning Symbols and Precautions, which is visibly under to the
Battery Cover (see Section 1.3)
1.2.2 Battery handling guide
•
Do not expose battery to temperature over 50
℃
•
Do not damage the unit in such ways as dropping, deforming, impacting, cutting
•
Do not connect anode and cathode terminal block opposite direction.
•
Do not charge or discharge damaged battery.
•
Do not place any foreign objects on the top of the Battery Pack and on the cooling
•
Do not put the battery pack upside down on the ground.
•
Safety
55℃
Summary of Contents for RESU10H StorEdge
Page 1: ...INSTALLATION MANUAL 10H ...
