Lexus RC300h 2017, Manual

Page: 71 / 640

71
1-1. For safe use
1
For
sa
fe
ty
an
d s
ec
uri
ty
RC300h_EE(OM24740E)
*
1
: Adjust the front seatback to the most upright position. Move the front seat to the
rearmost position.
If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint. If the passenger seat is equipped with a
vertical height adjuster, it must be placed in the upper most position.
Follow these procedures:
• For installing a baby seat with support base
If the baby seat interferes with the seatback when latching the baby seat into the
support base, adjust the seatback rearward until there is no interference.
• For installing a forward-facing child seat
If there is gap between the child seat and the seatback, tilt the seatback until good
contact is achieved. If the seat belt shoulder anchor is ahead of the child seat belt
guide, move the seat cushion forward.
• For installing a junior seat
If the child in your child restraint system is in a very upright position, adjust the
seatback to the most comfortable position.
If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
*
2
: If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint.
●
Adjust the front seat so that it does not interfere with the child or child restraint
system.
●
The child restraint systems mentioned in the table may not be available out-
side of the EU area.
●
Other child restraint systems which are different from the systems mentioned
in the table can be used, but the suitability of the systems must be carefully
checked with the child restraint system manufacturer concerned and the
seller of those seats.