Lexus RC300h 2017, Manual

Page: 296 / 640

296
4-5. Using the driving support systems
RC300h_EE(OM24740E)
■
When approaching three-dimensional objects
The estimated course lines target a flat surfaced objects (such as the road). It
is not possible to determine the position of three-dimensional objects (such as
vehicles) using the estimated course lines and distance guide lines. When
approaching a three-dimensional object that extends outward (such as the
flatbed of a truck), be careful of the following.
●
Estimated course lines
Visually check the surroundings
and the area behind the vehicle.
In the case shown in the illustra-
tion, the truck appears to be out-
side of the estimated course lines
and the vehicle does not look as if
it will hit the truck. However, the
rear body of the truck may actu-
ally cross over the estimated
course lines. In reality if you back
up as guided by the estimated
course lines, the vehicle may hit
the truck.
●
Distance guide lines
Visually check the surroundings
and the area behind the vehicle.
On the screen, it appears that a
truck is parked at point
. How-
ever, in reality if you back up to
point
, you will hit the truck.
On the screen, it appears that
is closest and
is farthest away.
However, in reality, the distance to
and is the same and is
farther than and .
2
1
1
3
1 3 2
1 3