222
GS350_300_GS F_OM_OM30G34U_(U)
4-3. Operating the lights and wipers
■
Temporarily lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
Turn the engine switch off while the following conditions are met.
• The headlight switch is in
or
.
• The headlight switch lever is in high beam position.
• Automatic High Beam switch is on.
Turn the engine switch to IGNITION ON mode.
Within 30 seconds after , repeat pulling the headlight switch lever to the original
position then pushing it to the high beam position quickly 10 times, then leave the lever
in high beam position.
If the sensitivity is changed, the Automatic High Beam indicator is turn on and off 3
times.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
■
Warning message
Warning messages are used to indicate a system malfunction or to inform the driver of
the need for caution. (
→
1
2
3
2
4
Summary of Contents for GS F
