B. VEHICLE INTERIOR (Continued)
30
Lexus PDS
Warning Lights and Alarm
Item
Function/ Condition
PD0364
D
Parking Brake Operation
Indicator Light*
D
EBD System Warning
Light*
D
Brake Fluid Level Warning
Light*
D
When the parking brake is ON or a failure occurs in the EBD
(Electronic Brake force Distribution) system, the meter ECU
receives the input of BEAN (Body Electronics Area Network)
signals from the skid control ECU and effects control to
illuminate this light.
D
When the brake fluid level switch turns ON as a result of a low
brake fluid level, this light illuminates.
PD0365
ECB (Electronically Controlled
Brake System) Warning Light*
When a failure occurs in the ECB (Electronically Controlled Brake
System), the meter ECU receives the input of BEAN (Body
Electronics Area Network) signals from the skid control ECU and
effects control to illuminate or flash this light.
PD0366
Seat Belt Reminder Light
When the power switch is in the “IG-ON” mode and the seat belt is
unbuckled, the meter ECU receives the input of BEAN (Body
Electronics Area Network) signals from the center airbag sensor
assembly and effects control to flash this light.
PD0367
Cruise Operation / Warning
Light
D
When the cruise control system is operating (main switch ON),
the meter ECU receives the input of BEAN (Body Electronics
Area Network) signals from the HV ECU and effects control to
illuminate this light.
D
When a failure occurs in the cruise control system, the meter
ECU receivers the input of BEAN (Body Electronic Area
Network) signals from the HV ECU and effects control to flash
this light.
PD0368
AVS Operation Indicator Light*
When the AVS (Adaptive Variable Suspension System) SPORT
mode is selected, the meter ECU receives the input of BEAN (Body
Electronics Area Network) signals from the suspension control ECU
and effects control to illuminate or flash this light.
PD0369
Hybrid Power Operation
Indicator Light
When the HYBRID POWER mode is selected, the meter ECU
receives the input of BEAN (Body Electronics Area Network)
signals from the ECM and effects control to illuminate this light.
PD0370
Hybrid SNOW Operation
Indicator Light
When the HYBRID SNOW mode is selected, the meter ECU
receives the input of BEAN (Body Electronics Area Network)
signals from the ECM and effects control to illuminate this light.
PD0371
SRS Airbag Warning Light*
If a failure associated with the SRS airbags occurs, the meter ECU
receives the input of BEAN (Body Electronics Area Network)
signals from the center airbag sensor assembly and effects control
to illuminate this light.
PD0372
Charge Warning Light*
When a failure occurs in the L terminal voltage of the alternator, the
meter ECU receives the input of BEAN (Body Electronics Area
Network) signals from the HV ECU and effects control to illuminate
this light.
PD0373
Check Engine Warning Light
When a failure occurs in the engine control system, the HV ECU
effects control to illuminate this light.
PD0374
ABS Warning Light*
When a failure associated with the ABS occurs, the meter ECU
receives the input of BEAN (Body Electronics Area Network)
signals from the skid control ECU and effects control to illuminate
this light.
*: This light goes off a few seconds after the power switch is selected in the “IG-ON” mode
