27
If you did not completely install the photo software, the Memory
Card Manager dialog box does not appear when you insert your
memory card into the USB Card Reader. To check to see if the
photo software is installed:
From your desktop, click Start Programs or All Programs.
If ACD Systems does not appear in your list of programs, install the
photo software (CD–1). Refer to the Setup Guide for installation
instructions.
1
Disconnect your printer from any external devices.
2
Connect your printer directly to your computer with a USB cable.
3
Follow these instructions to print a test page.
a
Open the Lexmark Z65 Solution Center (see page 7).
b
From the Troubleshooting tab, click Print a test page.
•
If the test page prints, the problem may be with your external
devices, not your printer. Check the documentation that came
with your external devices for help.
•
If the test page does not print, refer to the printer software Help
(see page 7) for further troubleshooting information.
For additional help solving printing problems, refer to the Setup
Troubleshooting section of the Setup Guide.
Did you install the photo software completely?
Is your printer connected to your computer through an external
device, such as a USB hub, switch box, scanner, or fax machine?
If not, refer to the Setup Troubleshooting section of the Setup
Guide for help. If it is, follow these steps:
