Lexmark XC9445 User Manual Download Page 475

Page: 475 / 504

Action

Yes

Step 2

Match the paper size setting and the paper loaded in the tray.

Copy the document or photo.

Is the document or photo copied correctly?

The problem is
solved.

Contact

customer

support

Poor copy quality

Action

Yes

Step 1

Clean the scanner glass and the ADF glass with a damp, soft,
lint

‑

free cloth. If your printer has a second ADF glass inside the

ADF, then also clean that glass.

For more information, see

“Cleaning the scanner” on page

383

Make sure that the document or photo is loaded facedown on
the upper left corner of the scanner glass.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Go to step 2.

Step 2

Check the quality of the original document or photo.

Adjust the scan quality settings.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Contact

customer

support

Vertical dark streaks on output when scanning from the ADF

ABCDE
ABCDE
ABCDE

Leading edge

Trailing edge

Action

Yes

Step 1

Open the scanner cover.

Using a damp, soft, lint

‑

free cloth, wipe the ADF glass and the

white underside of the scanner cover.

Close the scanner cover.

Do vertical streaks appear on scanned documents?

Go to step 2.

The problem is
solved.

Troubleshoot a problem

475

Summary of Contents for XC9445

























































































































































































































































































































































































































































































































Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands

Lexmark XC9445, User Manual

Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands