Lexmark XC9445 User Manual Download Page 257

Page: 257 / 504

Menu item

Description

Blank Pages

Blank Page Removal (Do Not Remove*)

Blank Page Sensitivity (5*)

Set the sensitivity of scans in relation to blank pages in the original
document.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Admin Controls

Menu item

Description

Max E

‑

mail Size

0–65535 (0*)

Set the allowable ﬁle size for each e

‑

mail.

Size Error Message

Specify an error message that the printer sends when an e

‑

mail exceeds

its allowable ﬁle size.

Note:

You can type up to 1024 characters.

Limit Destinations

Limit sending of e

‑

mail only to the speciﬁed list of domain name.

Note:

Use a comma to separate each domain.

Send Me a Copy

Never appears*

On by Default

Off by Default

Always On

Send a copy of the e

‑

mail to yourself.

Allow self e

‑

mails only

Off*

Set the printer to send e

‑

mails to yourself only.

Use cc:/bcc:

Off*

Enable carbon copy and blind carbon copy in e

‑

mail.

Use Multi

‑

Page TIFF

Off

On*

Enable scanning of multiple TIFF images in one TIFF ﬁle.

TIFF Compression

JPEG

LZW*

Specify the compression type for TIFF ﬁles.

Text Default

5–95 (75*)

Set the text quality in the content being scanned.

Text/Photo Default

5–95 (75*)

Set the text and photo quality in the content being scanned.

Photo Default

5–95 (50*)

Set the photo quality of the content being scanned.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

257

Summary of Contents for XC9445

























































































































































































































































































































































































































































































































Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands

Lexmark XC9445, User Manual

Search results

Summary of Contents for XC9445

Reviews:

Related manuals for XC9445

Brands by name

Popular brands