2-12
Service Manual
7541-03x
Vertical lines (process direction using the ADF)
Spots (using flatbed scanner)
Step
Check
Yes
No
1
Check the small platen glass on the scanner unit
assembly.
Is the large and small platen glass contaminated or
damaged?
Clean or replace
the scanner
platen glass
cover.
Go to
“Flatbed
upper cover”
on page 4-161
.
Go to step 2.
2
Check the three mirrors in the scanner unit assembly.
Are the three mirrors contaminated or show signs of
dust?
Clean the three
mirrors in the
scanner unit
assembly.
Go to step 3.
3
Check the white strip on the bottom of the large platen
glass.
Is the white strip contaminated?
Clean the white
strip and POR
the machine.
Go to step 4.
4
Perform a print test using the scanner unit assembly.
Does the error continue?
Replace the
scanner unit
assembly.
Go to
“Flatbed
assembly
removal” on
page 4-116
.
Problem solved.
5
Perform a print test using the ADF unit assembly.
Does the error continue?
Replace the ICC
board.
Go to
“ICC
board” on
page 4-123
.
Problem solved.
Step
Check
Yes
No
1
Check the large platen glass on the scanner unit
assembly.
Is the large platen glass contaminated or damaged?
Clean or replace
the scanner
platen glass
cover.
Go to
“Flatbed
upper cover”
on page 4-161
.
Go to step 2.
2
Check the three mirrors in the scanner unit assembly.
Are the three mirrors contaminated or show signs of
dust?
Clean the three
mirrors in the
scanner unit
assembly.
Go to step 3.
3
Check the white strip on the bottom of the large platen
glass.
Is the white strip contaminated?
Clean the white
strip and POR
the machine.
Go to step 4.
Summary of Contents for X925
