Lexmark X46 Series, Service Manual

Page: 123 / 310

Diagnostic aids
3-17
7014-xxx
Diagnostics menu
Entering Diagnostics menu
1.
Turn off the printer.
2.
Press and hold 3 and 6.
3.
Turn on the printer.
4.
Release the buttons after ten seconds.
Available tests
The tests display on the operator panel in the order shown:
Note: Menus may vary depending on the features and options of the printer.
Registration See “Registration (printer)” on page 3-18 .
Print tests See “Print Tests” on page 3-20 .
Hardware tests See “Hardware Tests” on page 3-21 .
Duplex tests See “Duplex Tests” on page 3-24 .
Input Tray Tests See “Input Tray Tests” on page 3-26 .
Output Bin Tests See “Output bin tests” on page 3-27 .
Base Sensor Test See “Base Sensor Test” on page 3-28 .
Device Tests See “DEVICE TESTS” on page 3-28
Printer setup See “PRINTER SETUP” on page 3-29 .
EP Setup See “EP SETUP” on page 3-31 .
Reports See “Reports” on page 3-32 .
Event Log See “Reports” on page 3-32 .
Scanner Tests See “Scanner Tests” on page 3-34
Exit Diagnostics See “Exit Diagnostics” on page 3-37 .