Lexmark X46 Series, Service Manual

Page: 130 / 310

3-24
Service Manual
7014-xxx
Duplex Tests
Quick Test (duplex)
This test prints a duplex version of the Quick Test that can be used to verify that the correct placement of the
top margin on the back side of a duplex page. You can run one duplexed page (
Single ), or continue printing
duplexed pages ( Continuous ) until Stop is pressed. For information about changing the margin, see
“Top Margin (duplex)” on page 3-25 .
Note: Before you set the duplex top margin, be sure to set the registration. See “Registration (printer)” on
page 3-18 .
The paper you choose to print the page on should be either Letter or A4.
To run the Quick Test (duplex):
1. Touch to select Quick Test from DUPLEX TESTS.
2. Touch to select Single or Continuous .
•
The single Duplex Quick test cannot be canceled.
•
The printer attempts to print the Quick Test Page from the default paper source. If the default paper
source only supports envelopes, then the page is printed from Tray 1.
•
Check the Quick Test Page for the correct offset between the placement of the first scan line on the
front and back side of a duplexed sheet.
The single test stops automatically when a single duplex sheet is printed, and the continuous test continues
until you press
Stop .