2-2
Service Manual
4045-XXX
Service Error Codes
Service Error Codes are generally non-recoverable except in an
intermittent condition when you can POR the printer to temporarily
recover from the error condition.
Error Code
Action
900 RIP Software
Replace the controller board.
902
Engine Software
Indicates an unrecoverable engine software error.
Replace the engine board.
920 Fuser Error
Indicates that the fuser is below temperature when
printing. Go to the
“Cold Fuser Service Check” on
page 2-23
.
921 Fuser Error
Indicates that the fuser is below standby temperature
when the printer is idle. Go to the
“Cold Fuser Service
Check” on page 2-23
.
922 Fuser Error
Fuser failed to reach standby temperature. Go to the
“Cold Fuser Service Check” on page 2-23
.
923 Fuser Error
Fuser is too hot during printing or when printer is idle. Go
to the
“Hot Fuser Service Check” on page 2-25
.
924 Fuser Error
An open circuit has been detected in the Fuser
Thermistor Circuit. Go to the
“Hot Fuser Service Check”
on page 2-25
.
931-935
Printhead Error
These errors represent a problem with the printhead. Go
to the
“Printhead Service Check” on page 2-36
.
931 - Printhead:
no first Hsync
932 - Printhead:
Lost Hsyncs
935 - Mirror Motor
unable to reach
operating speed.
936
Transport Motor
Indicates a problem with the main drive motor. Go to the
“Main Drive Service Check” on page 2-29
.
Summary of Contents for Optra M410
