PJL
3-48
Common Variables for PCL Emulation
Note:
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company’s LaserJet printers.
Use these variables only for PCL emulation. The
[command modifier:
value
]
parameter should be specified as
LPARM
:
PCL
. For example:
@PJL SET LPARM:
PCL
FONTSOURCE=
I
<CR><LF>
To determine which variables your printer supports, see “Table B-3: Common
Variables for PCL Emulation” on page B-11.
Table 3-5: Common Variables for PCL Emulation
Variable
Function
Selections
Factory Default
FONTNUMBER
Font Number
0, 1, .... n
0
FONTSOURCE
Font Source
I, S, M1, M2, M3, M4, D1
I
Internal font source
S
Permanent download fonts
M1, M2,
M3, M4
Flash font source
D1
Disk font source
All other values default to internal font source.
I
PITCH
Default pitch
(fixed-pitch fonts)
0.08 to 100 (in increments of 0.01)
Note: If an invalid pitch is requested, the printer
selects the closest pitch.
10.00
PTSIZE
Default point size
(proportional
spaced fonts)
1 to 1008 (in increments of 0.25)
Note: If an invalid point size is requested, the
printer selects the closest point size.
12.00
SYMSET
Symbol set for the
default font
For a list of the values for the Lexmark C912,
see “Selecting Symbol Sets for the Lexmark
C912” on page 2-14.
For a list of the values for the Lexmark E321,
see “Selecting Symbol Sets for Lexmark E321”
on page 2-33.
For a list of the values for the Lexmark E323,
T630, T632, and T634, see “Selecting Symbol
Sets for the Lexmark E323, T630, T632, and
T634” on page 2-44.
If a symbol set is requested that is not resident
in the printer, the symbol set is not changed.
PC-8, PC850
(Country specific)
