Lexmark M1246 User Manual Download

Page: 26 / 152

Device

Preferences

Menu item

Description

Display Language

[List of languages]

Set the language of the text that appears on the display.

Note:

Not all languages are available for all printer models.

You may need to install special hardware for some
languages to appear.

Country/Region

[List of countries]

Identify the country that the printer is conﬁgured to operate.

Run Initial Setup

Yes

No*

Run the setup wizard.

Displayed information

Display Text 1 (IP Address*)

Display Text 2 (Date/Time*)

Custom Text 1

Custom Text 2

Specify the information to appear on the home screen.

Note:

Custom Text 1 and Custom Text 2 appear only in some

printer models.

Date and Time

Conﬁgure

Current Date and Time

Manually Set Date and Time

Network Time Protocol

Enable NTP

NTP Server

Conﬁgure the printer date and time.

Notes:

•

Enable Authentication appears only in some printer
models.

•

When Enable Authentication is set to MD5 key, Key ID
and Password appear.

Paper Sizes

U.S.*

Metric

Specify the unit of measurement for paper sizes.

Note:

The country or region selected in the initial setup

wizard determines the initial paper size setting.

Flash Drive Access

Enabled*

Disabled

Enable access to the ﬂash drive.

Note:

This menu item appears only in some printer models.

Screen Timeout

10–300 (60*)

Set the idle time in seconds before the display shows the home
screen, or before the printer logs off a user account
automatically.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for M1246

























































































































































Search results

Summary of Contents for M1246

Reviews:

Related manuals for M1246

Brands by name

Popular brands

Lexmark M1246, User Manual

Search results

Summary of Contents for M1246

Reviews:

Related manuals for M1246

Brands by name

Popular brands