Lexmark M1246 User Manual Download

Page: 127 / 152

Action

Yes

Step 5

Check if the cables connecting the printer and the computer are
inserted in the correct ports.

Are the cables inserted in the correct ports?

Go to step 6.

Make sure to match
the following:

•

The USB cable
with the USB port
on the printer

•

The Ethernet
cable with the
Ethernet port on
the printer

Step 6

Turn off the printer, reinstall the hardware options, and then turn it
back on.

For more information, see the documentation that came with the
option.

Is the printer responding?

The problem is
solved

Go to step 7.

Step 7

Install the correct print driver.

Is the printer responding?

The problem is
solved

Go to step 8.

Step 8

Turn off the printer, wait for about 10 seconds, and then turn it back
on.

Is the printer responding?

The problem is
solved.

Contact

customer

support

Adjusting toner darkness

From the control panel, navigate to:

Settings

Print

Quality

Toner Darkness

For non-touch-screen printer models, press

to navigate through the settings.

Adjust the setting.

Apply the changes.

Job prints from the wrong tray or on the wrong paper

Action

Yes

Step 1

Check if you are printing on the correct paper.

Print the document.

Is the document printed on the correct paper?

Go to step 2.

Load the correct
paper size and paper
type.

Troubleshooting

127

Summary of Contents for M1246

























































































































































Search results

Summary of Contents for M1246

Reviews:

Related manuals for M1246

Brands by name

Popular brands

Lexmark M1246, User Manual

Search results

Summary of Contents for M1246

Reviews:

Related manuals for M1246

Brands by name

Popular brands