Lexmark Jetprinter 4079-00 series Service Manual Download

Page: 80 / 183

4-3

4079-00X

Follow this procedure to adjust the head gap:

1. Center the carriage (see

“Printhead Uncapping and Carriage

Centering” on page 4-9

2. Unplug the power cord from the AC outlet.

3. Remove the paper guide, top cover, and inner cover.

4. Set the printhead position lever to position 1 (normal position).

5. Using a flat-blade screwdriver, turn the head gap adjustment

(on the left side of the carriage) clockwise until the right-most
click is reached. The head gap is minimum at this position.

6. Move the carriage to the left (home) position.

7. Remove feeler gauges from the feeler gauge set to make a

thickness of 1.7 mm (0.066 in.).

Summary of Contents for Jetprinter 4079-00 series
























































































































































































Search results

Summary of Contents for Jetprinter 4079-00 series

Reviews:

Related manuals for Jetprinter 4079-00 series

Brands by name

Popular brands

Lexmark Jetprinter 4079-00 series, Service Manual

Search results

Summary of Contents for Jetprinter 4079-00 series

Reviews:

Related manuals for Jetprinter 4079-00 series

Brands by name

Popular brands