Scenario 3: VoIP telephone service
To connect:
1
Connect one end of a telephone cable to the port of the printer.
2
Connect the other end of the cable to the port labeled
Phone Line 1
or
Phone Port
on the VoIP adapter.
The port labeled
Phone Line 2
or
Fax Port
is not always active. You may need to pay extra to your VoIP provider if
you want to activate the second phone port.
3
Remove the protective plug from the
port of the printer, and then connect the telephone to the port.
Tips for this setup:
•
To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and
then listen for a dial tone. If you hear a dial tone, then the port is active.
•
If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the
second phone port. You can use a phone splitter. Plug the phone splitter into the
Phone Line 1
or
Phone Port
, and
then plug the printer and telephone into the splitter.
Make sure you use a phone splitter,
not
a line splitter. To make sure that you are using the correct splitter, plug an
analog telephone into the splitter and then listen for a dial tone.
Setting up the printer to fax
35
