Lexmark E32x, Service Manual

Page: 123 / 246

Diagnostic information
2-93
4500
Vertical or horizontal streaks
appear on the page. For E320/E322 models only, run
engine clean cycle to remove any
toner that may have accumulated.
See
“Execute engine clean cycle ”
on page 3-13 (E320/E322) for more
information.
Replace the print cartridge.
Toner smears or rubs off the
page. • For E320/E322 models only, run
engine clean cycle to remove any
toner that may have accumulated.
See
“Execute engine clean
cycle ” on page 3-13 for more
information.
• Check fuser temperature. Replace
if necessary.
• Try a different kind of paper. Paper
designed for copiers gives the
best quality.
• If you are printing on special
media, such as card stock or
labels, be sure you select the
correct paper type in the printer
driver.
• Change the media texture setting.
If the setting is not in your driver,
you can download the correct
Lexmark setup utility from the
Lexmark Web site at
www.lexmark.com.
The print is getting light but the
Toner Low light is not on. • The Toner Low light does not
come on if the standard 1,500
page print cartridge is installed.
• Remove the print cartridge and
gently shake it from side to side to
redistribute the toner.
• Replace the print cartridge.
Problem Action