Menu item
Description
Auto CR after LF
Off*
On
Set the printer to perform a carriage return after a line feed control
command.
Note:
Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Auto LF after CR
Off*
On
Set the printer to perform a line feed after a carriage return control
command.
Tray Renumber
Assign Tray [x]
Off*
None
0–201
Assign Manual Paper
Off*
None
0–201
Assign Manual Envelope
Off*
None
0–201
Configure the printer to work with print drivers or applications that use
different source assignments for the paper source.
Tray Renumber
View Factory Defaults
Show the factory default setting assigned for each paper source.
Tray Renumber
Restore Defaults
Return all tray assignments to factory default values.
Print Timeout
Disabled
Enabled* [90]
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
Note:
Print Timeout Time appears only in some printer models.
Print Timeout Time
1–255 (90*)
Note:
An asterisk (*) next to a value indicates the factory default setting.
Image
Menu item
Description
Auto Fit
On
Off*
Select the best available paper size and orientation setting for an image.
Note:
When set to On, this menu item overrides the scaling and orientation
settings for the image.
Invert
Off*
On
Invert bitonal monochrome images.
Note:
This menu item does not apply to GIF or JPEG image formats.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Use printer menus
55
