54
Configure for TCP/IP
Step 9: Configure for TCP/IP
If you have TCP/IP available on your network, we recommend that you
assign an IP address to the printer.
Assigning a printer
IP address
If your network is using DHCP, an IP address is automatically assigned
after you connect the network cable to the printer.
1
Look for the address under the “TCP/IP” heading on the
network setup page you printed in “Printing a network setup
page” on page 53.
2
Go to “Verifying the IP settings” on page 55 and begin with
step 2.
Note:
Instructions for other
methods of setting the IP
address are in the online
documentation on the
drivers CD that shipped with
your printer. Launch the CD,
click View Documentation
Network Printer Install.
If your network is not using DHCP, then you must manually assign an
IP address to the printer.
One of the easiest ways is to use the operator panel:
1
Press
Menu
until you see Network Menu, and then press
Select
.
2
Press
Menu
until you see Standard Network, and then press
Select
.
Standard Network appears if you purchased a printer with a
network port on the printer system board. If you have a MarkNet
print server installed in the option card, you see Network Option
1.
3
Press
Menu
until you see Std Net Setup (or Network 1 Setup),
and then press
Select
.
4
Press
Menu
until you see TCP/IP, and then press
Select
.
5
Press
Menu
until you see Set IP Address, and then press
Select
.
6
Change the address by pressing
Menu
to increase or decrease
each number. Press
Select
to move to the next segment. Press
Select
when you are finished.
The message
Saved
appears briefly.
Summary of Contents for 752e - X MFP Color Laser
Page 2: ......
Page 3: ...English...
