Lexmark 7300 Series, Service Manual

Page: 26 / 88

4418-X6X
2-6
Service Manual
1218 Serial Flash
Error Invalid parameters
have been passed to
ReadFlashPage. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
1219 Undefined
Signal Error Microprocessor has
encountered a bad
signal (other than an
abort, illegal
instruction, or
arithmetic exception). Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
2100 Unlock
Scanner The scanner
mechanism is locked in
place or unable to
move due to other
failure. Unlock the scanner.
2200 Scan Carrier
Stall The scan carrier has
stalled. Unplug the All-In-
One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, check all
connections to the
scanner. If
connections are okay
and the error
continues, replace
the system board.
3100 Fax Error There is a general
error receiving or
sending fax. Try resending or
receiving fax.
Code Name Description Action