2
Lift the green handle, and then pull the toner cartridge out of the
printer.
3
Place the cartridge aside.
4
Lift the green handle, and then pull the imaging unit out of the
printer.
1
2
5
Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage:
Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
6
Pull the jammed paper gently to the right, and then remove it from
the printer.
Note:
Make sure all paper fragments are removed.
1
2
Warning—Potential Damage:
The jammed paper may be
covered with toner, which can stain garments and skin.
7
Install the imaging unit.
Note:
Use the arrows on the side of the printer as a guide.
8
Insert the cartridge into the printer, and then push the green handle
back into place.
Notes:
•
Align the arrows on the guides of the toner cartridge with
the arrows in the printer.
•
Make sure the cartridge is fully pushed in.
9
Close the multipurpose feeder door and the front cover.
10
Do either of the following to clear the message and continue
printing:
•
For touch
‑
screen printer models, touch
or
Done
.
•
For non
‑
touch
‑
screen printer models, select
Next
>
>
Clear the jam, press OK
>
.
[x]
‑
page jam, open upper rear door. [202]
CAUTION—HOT SURFACE:
The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
21
