3
Slide the width guide to the correct position for the size of the paper
being loaded.
Note:
Use the paper size indicators on the bottom of tray to help
position the guides.
4
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
•
Hold transparencies by the edges, and then fan
them. Straighten the edges on a level surface.
Note:
Avoid touching the printable side of the
transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
5
Load the paper or specialty media.
Note:
Slide the stack gently into the multipurpose feeder until it
comes to a stop.
•
Load only one size and type of paper or specialty media at a
time.
•
Make sure the paper fits loosely in the multipurpose feeder,
lies flat and is not bent or wrinkled.
•
There are different ways of loading letterhead depending on
whether an optional staple finisher is installed or not.
Without an optional staple finisher
With an optional staple finisher
ABC
One
‑
sided printing
ABC
One
‑
sided printing
ABC
Two
‑
sided printing
ABC
Two
‑
sided printing
19
