Lexmark 4038-001 Service Manual Download Page 86

Page: 86 / 202

3-20

Service Manual

4038-001

Darkness

The darkness setting is used for an original document containing
paint markings or dark images:

•

Light

- works well with dark print.

•

Normal

- works well with standard typed or printed documents.

•

Dark

- works well with light print or faint pencil markings.

To adjust the darkness, press

Darkness

repeatedly.

Each time you press the button, the LED labeled with the selected
mode lights up.

Number

Select number of copies from 1 to 99.

1. Press

Number

2. Enter the number of copies to print using the numeric keypad.

3. Press

Select

The selected number appears on the display.

Summary of Contents for 4038-001











































































































































































































Search results

Summary of Contents for 4038-001

Reviews:

Related manuals for 4038-001

Brands by name

Popular brands

Lexmark 4038-001, Service Manual

Search results

Summary of Contents for 4038-001

Reviews:

Related manuals for 4038-001

Brands by name

Popular brands