Lexmark 34S0500 User Manual Download

Page: 89 / 144

Understanding printer messages

When

Manual Feeder

appears on the display, it refers to the multipurpose feeder.

List of status and error messages

Busy

Wait for the message to clear.

Canceling

Wait for the message to clear.

Close front door

Close the front door of the printer.

Defragmenting Flash DO NOT POWER OFF

Wait for the message to clear.

Warning—Potential Damage:

Do not turn the printer off while this message appears on the display.

DO NOT TOUCH Reading flash data DO NOT POWER OFF

As a part of this message, a bar graphic appears on one line of the display, indicating the percentage of processing
time completed.

Wait for the message to clear. The message displays until all code is received and the processing is complete.

Warning—Potential Damage:

If your printer is connected to a computer by a USB cable, do not touch the printer

control panel while this message appears on the display. Do not turn the printer off while this message appears.

Flushing buffer

Wait for the message to clear.

Formatting Flash DO NOT POWER OFF

Wait for the message to clear.

Warning—Potential Damage:

Do not power off while the printer is formatting the flash memory.

Hex Trace

The printer is in Hex Trace mode.

Understanding printer messages

Summary of Contents for 34S0500

















































































































































Search results

Summary of Contents for 34S0500

Reviews:

Related manuals for 34S0500

Brands by name

Popular brands

Lexmark 34S0500, User Manual

Search results

Summary of Contents for 34S0500

Reviews:

Related manuals for 34S0500

Brands by name

Popular brands