Lexmark 15W0003 - C 720 Color Laser Printer User Reference Manual Download

Page: 264 / 299

264

Values:

Format Disk

Purpose:

To format the printer hard disk.

Values:

ARNING

Do not turn off the printer while the hard disk is formatting.

See also:

61 Defective Disk

Format Flash

Purpose:

To format the flash memory.

Values:

ARNING

Do not turn off the printer while the flash is formatting.

See also:

51 Defective Flash

Restore

• All menu items are returned to the factory default values except:

– Display Language.
– All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared

Menu, LocalTalk Menu, and USB Menu.

• All downloaded resources (fonts, macros, and symbol sets) in printer

memory (RAM) are deleted. (Resources residing in flash memory or on the
hard disk are unaffected.)

Do Not Restore

User-defined settings remain.

Yes

Deletes any data stored on the hard disk and prepares the device to receive new resources.

Cancels the request to format the hard disk and leaves current resources stored on the disk.

Yes

Deletes any data stored in flash memory and prepares the flash memory to receive new
resources.

Cancels the request to format the flash memory and leaves current resources stored in flash
memory.

Summary of Contents for 15W0003 - C 720 Color Laser Printer












































































































































































































































































































Search results

Summary of Contents for 15W0003 - C 720 Color Laser Printer

Reviews:

Related manuals for 15W0003 - C 720 Color Laser Printer

Brands by name

Popular brands

Lexmark 15W0003 - C 720 Color Laser Printer, User Reference Manual

Search results

Summary of Contents for 15W0003 - C 720 Color Laser Printer

Reviews:

Related manuals for 15W0003 - C 720 Color Laser Printer

Brands by name

Popular brands