Lexicon RV-5, User Manual

Page: 142 / 202

Mode Adjust
Lexicon
6-8
DOLBY PRO LOGIC
The Dolby PRO LOGIC mode is designed for playback of Dolby
Surround-encoded sources. It decodes four channels from Dolby
Surround-encoded sources, and uses a mono surround channel
with a high-frequency rolloff above 7kHz.
This mode is useful for comparison purposes, particularly with the
L7 FILM, Dolby PLIIx MOVIE and DTS Neo:6 CIN listening mode.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-30 for
detailed descriptions
.
DTS NEO:6 CIN & DTS NEO:6 MUSIC
These modes are designed for playback of matrix-encoded digital
stereo film or music sources. DTS Neo:6 derives six channels when
both side and rear speakers are present (rear channels will be in
parallel). It derives five channels when only side or rear speakers are
present.
These listening modes are dynamic listening modes and cannot be
assigned as preferred listening modes. To select either of these
listening modes, use the remote control or front-panel Mode
button. When the 2-CH parameter is set to USE LAST, the RV-5 will
automatically activate a DTS Neo:6 listening mode if this mode was
activated the last time a 2-channel source was present.
Note:
• The RV-5 will not automatically activate a DTS NEO:6 listening
mode unless a 44.1kHz or 48kHz PCM digital source is present.
The DTS Neo:6 listening modes are not available with 88.2kHz or
96kHz, Dolby Digital or analog sources.
• The DTS Neo:6 MUSIC listening mode can be activated with the
front-panel or remote control Mode buttons. The DTS Neo:6 CIN
listening mode can also activated with the remote control DTS
button when a 2-channel input source is present.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-30 for
detailed descriptions
.
Parameter
OUTPUT LEVELS Refer to page 6-28
CUSTOM Refer to page 6-28
MODE ADJUST PRO LOGIC
Parameter
OUTPUT LEVELS Refer to page 6-28
CUSTOM Refer to page 6-28
MODE ADJUST CIN MUSIC OR