Lexicon RV-5, User Manual

Page: 181 / 202

RV-5 Appendix
A-3
Switching Active
Output Level 1.0V peak-to-peak
Impedance
75
Ω
Input Return Loss >40dB
Differential Gain <0.5%
Differential Phase <0.5
°
Bandwidth >25MHz
K Factor <0.3%
Gain ±0.15dB
Signal-to-Noise Ratio >65dB
Frequency Response 10Hz to 10MHz + 0.1/–0.3dB
Component Video Performance
Compatibility 3-Channel (Y, Pr, Pb), format-independent
Switching Passive
Impedance 75
Ω
Insertion Loss <3dB
Bandwidth >150MHz
Video Converter NTSC, PAL, SECAM, to Y/Pb/Pr
Microphone Input Connectors
Inputs 4 3.5mm miniature phone jacks
Input Sensitivity 10mV Rms (400mV maximum input level)
Input Impedance 20k
Ω
(accepts balanced or unbalanced input signals)
FM Tuner Performance
Tuning Range 64MHz to 108MHz
Usable Sensitivity <4uV, 1.6mV typical
Selectivity >87dBmV, 93dBmV typical
Composite & S-Video Performance
Frequency Response 50Hz to 16kHz, +0.1dB/-1.0dB
THD + Noise <0.4% at 1 kHz (stereo)
Signal-to-Noise Ratio 50dB minimum at 60dBmV
Image Rejection >50dB, >60dB typical
AM Suppression >45dB, >55dB typical
AM Tuner Performance
Tuning Range 520 to 1720kHz
Usable Sensitivity <8uV, 4mV typical
THD + Noise < 0.56%, 0.20% typical (1kHz, 60dBmV, 30% mod)
Wideband AGC >80dBmV
Phono Performance (MM)
Frequency Response 50Hz to 20kHz, +0.5dB/-0.5dB, rumble filter -4dB at 10Hz
THD + Noise < 0.20%, 20Hz to 10kHz, 4.7mV input
Signal-to-Noise Ratio 72dB minimum
Compatible Amplifier Connectors
Banana Plugs Standard 0.75 inch plugs
Spade Connectors Size 10-12 gauge
Bare Wire Up to 10 gauge bare wire
Other
Trigger Outputs One power on/off and one programmable connector on
detachable screw terminals (+12 VDC, 0.5 amps each)
RS-232 Serial Input/
Output Two 9-pin D-sub connectors
Power Requirements 120-230 VAC, 50-60Hz, 60W (universal line input), detach-
able power cord
FM Tuner Performance