Lexicon
34
System
Configuration
Restoring the original parameter values of an Effect
The RESTORE PARAMETERS function allows you restore the cur-
rently selected Effect to its factory preset state.
When you select this function, you will be prompted to reconsider
erasing your changes. — If you
don’t want to erase your versions, press
DONE to exit the menu. Pressing SELECT in response to the displayed
query will restore all of the factory preset values to the Effect.
Naming your custom Effect
EDIT EFFECT NAME allows you to assign a new name, of as many as
13 characters, to your Effect. With EDIT EFFECT NAME highlighted,
press SELECT to display the current name with a cursor indicating
which character position can be modified. SELECT moves the cursor to
a new position.
▲
and
▼
scroll through the available character set.
Press DONE to save the new name.
Note that the following effects cannot be assigned custom names: PRO
LOGIC, THX CINEMA, LOGIC 7, DOLBY DIGITAL, THX 5.1, 51. Logic
7, DTS FILM, DTS THX and DTS LOGIC 7.
Restoring the original Effect name
RESTORE EFFECT NAME allows you to restore the original factory
name of an Effect, without changing any of your modified parameter
settings. When you select this function, the message PRESS SELECT
TO RESTORE EFFECT NAME allows you to reconsider erasing your
custom name. — If you
don’t want to erase your version, press DONE
to exit the menu. Pressing SELECT in response to the displayed query
will restore the factory preset name.
Listening to only the MC-1 Effect
Selecting EFFECT ONLY allows you to listen to only the effects added
by the MC-1 to the currently loaded program. With this function selected,
use
▲
and
▼
to turn this function on or off.
Front/Back Fader
This control allows you to adjust the front/rear balance for the current
effect. This control can also be accessed on the remote by pressing and
holding the Shift button and using
▲
to move the balance point forward,
and
▼
to move it backward.
