Lexicon MC-1 Owner'S Manual Download Page 7 | Manualshive

Page: 7 / 67

background image

Lexicon

soundtracks as well as Surround EX for those recorded in the Dolby
Digital and DTS discrete formats. These enhancements ensure that film
soundtracks, which are typically mixed for the acoustics of large
theaters, sound as the filmmakers intended when played back in the
relatively small environment of a home theater.

Using the Documentation

Because the MC-1 is designed to be customized for your system and
your listening space, the information required for installation is exten-
sive.

The Owner's Manual is designed to assist you in installing, calibrating
and operating the MC-1. It should be used in conjunction with the remote
control when configuring the system to perform optimally in your
environment. This manual was written with the underlying assumption
that the installer is familiar with audio/video system installation. An
Installation Worksheet is provided at the end of this manual for docu-
mentation of the settings arrived at during the calibration procedure.

Glossary of Terms

Although the MC-1

performs very complex signal processing, a great

deal of effort has gone into making the technology behind the effects as
transparent as possible to the user. To understand the overall organi-
zation of the unit, it is helpful to define those few terms which are unique
to the MC-1.

AC-3 FX The term AC-3 FX (Dolby Digital Effects) is used to describe
all of the effects which are compatible with Dolby Digital input signals.
Any AC-3-capable software and/or source components should be
labeled with a logo, similar to the one on the MC-1 front panel.

DTS FX The term DTS FX (Digital Surround Effects) is used to describe
all of the effects which are compatible with DTS Digital Surround input
signals. Any DTS-capable software and/or source components should
be labeled with a logo, similar to the one on the MC-1 front panel.

Downmix describes the process of creating a two-channel output from
a multichannel (>2) signal. Downmixing is necessary to maintain
compatibility between multichannel formats and devices such as Dolby
Digital and DTS, and two-channel formats and devices, such as stereo
tape decks and VCRs.

«
...
5
6
7
8
9
...
»

Summary of Contents for MC-1




































































Reviews:

No comments

Related manuals for MC-1

Brand: ABB Pages: 2

Brand: Warner Electric Pages: 3

Brand: iCeeO2 Pages: 7

Brand: SABAF Pages: 6

Brand: UNITED Pages: 8

Brand: Samson Pages: 52

Brand: UNISENSE Pages: 16

Brand: Xylem Pages: 48

Brand: ZIMMERLI MESSTECHNIK Pages: 12

Brand: H-Tronic Pages: 32

Brand: TCS Pages: 8

Brand: Chamberlain Pages: 4

Brand: Shimaden Pages: 16

Brand: Zonex Pages: 16

Brand: Yale Pages: 2

Brand: Ebyte Pages: 22

Nuvo-3000 Series

Brand: Neousys Technology Pages: 101

SMC-3 150-C30NBD

Brand: AB Quality Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands