Lexicon LXP-15 II, Owner'S Manual

Page: 56 / 98

Lexicon
LXP-15 II Owner's Manual
4-18
When using any of the Note Sources (LastNote, HiNote, LoNote), the threshold
value is the
Note Number that will correspond to the initial Destination parameter
value. (On a standard 5-octave MIDI keyboard, 36 corresponds to the lowest C,
60 is middle C, and 96 is the highest key.) Threshold should be set to a value
within the overall Note Number range of the MIDI controller.
Always set the initial parameter values first, before assigning patches. For most
applications:
• If the initial value is set to maximum, set the threshold to 127 or the highest
Note Number.
• If the initial value is set to minimum, set the threshold to 0 or the lowest Note
Number.
• If the initial value is set to 50% or center, set threshold to 64 or the middle
Note Number.
When using a bidirectional MIDI slider as a Source (Pitch Bend, Balance, Pan),
set threshold to 64.
When After Touch or Breath are used as Sources, set threshold to 0 or 127.
Scale values can be positive or negative. Positive values will increase the value
of the Destination parameter as the Source controller is moved from minimum
to maximum (from 0 to 127). Negative scale values invert this relationship — the
value of the Destination parameter will
decrease as the control is moved from
minimum to maximum.
Tips for Setting
Threshold Values
SCALE
Threshold "0"
Scale = 100%
max
mid
min
100%
0%
Threshold "0"
Scale = 200%
100%
0%



No
Effect
Threshold "0"
Scale = 50%
50%
0%
Positive scale values INCREASE parameter values.
Negative scale values DECREASE parameter values.
max
mid
min
max
mid
min
Full range of slider
controls full range
of parameter values. Bottom half of slider
range controls full range
of parameter values. Full range of slider
controls half of the range
of parameter values.
Setting Scale Values