11
EN
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
A.
lights up.
1.
Replace the filter.
2.
Turn on the air purifier.
3.
Press and hold
for 3 seconds.
4.
will turn off when successfully
reset.
B.
The filter was changed before
lit up.
1.
Press and hold
for 3 seconds.
This will turn on
.
2.
Press and hold
again for 3
seconds.
3.
will turn off when successfully
reset.
C A R E & M A I N T E N A N C E
Figure 3.1
will light up as a reminder to check the
filter. Depending on how much you use the
air purifier, the indicator should turn on within
6–8 months. You may not need to replace
your filter yet, but you should check it when
turns on.
Check Filter Indicator
The outer pre-filter should be cleaned
every 2–4 weeks to increase the efficiency
and extend the life of your filter. Clean the
pre-filter using a soft brush or vacuum hose
to remove hair, dust, and large particles.
[Figure 3.1]
Do not
clean the filter with water
or other liquids.
Cleaning the Filter
Cleaning the Air Purifier
•
Unplug before cleaning.
•
Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
•
Vacuum the inside of the air purifier.
•
Do not
clean with abrasive chemicals or
flammable cleaning agents.
Filter
When to Clean
How to Clean
When to Replace
Pre-Filter
Every 2–4 weeks
Use a soft brush or vacuum
hose
[Figure 3.1]
6–8 months
True HEPA
& Activated
Carbon Filter
Do not clean
Summary of Contents for True HEPA Core 300-RAC
Page 84: ...levoit com A1 01 00_D_20I02...
