background image

24

1.

 

Introduction

 

 

Your 

LEVO

 active-easy

 is maintenance-free dispensing the user with the need for further 

maintenance work except for cleaning the wheelchair on a regular basis. 
 
Due to its complex design, the wheelchair should be checked for safety at least once a year by your 
LEVO dealer or authorized technician. 
 
This service manual has been designed for use by your LEVO dealer or authorized technician. It 
contains all information required to carry out safety checks and repair works on your 

LEVO

 

active-

easy

. It will ensure that your wheelchair is a reliable, safe and helpful means of transport. 

 
Always read and apply this service manual in connection with the instruction manual. 
 
 

2.

 

Accident prevention & safety 

 
Accidents can happen. Be aware of possible dangers when carrying out tests or works on your 
wheelchair. You should take suitable preventive measures to ensure your own safety and that of 
other persons. 

 
 
3.

 

Adjustments – general instructions 

 
Depending on the ability of the user’s friends and relatives, they may carry out some of the 
adjustment works themselves. This manual will tell you how to proceed. However, when delivered, 
your wheelchair should be adjusted to your personal needs by your LEVO dealer or authorized 
technician. 
 
 

4.

 

Repairs – general instructions 

 

Service and repair works on the 

LEVO

 active-easy 

should only be carried out by a LEVO dealer or 

authorized technician.

 

 

 

Repairs: For advice in all repairs in Switzerland contact LEVO AG if in Switzerland. For all 
other countries contact your local LEVO agent. Addresses are given at the front of this 
instruction and service manual. 

 

Major repairs: For all major repairs e.g. bent or damaged frame always replace complete 
components.  Never try to repair damaged steelwork or components.

 

 

Replacement parts: Factory replacement components should be used in all repairs, these are 
available from LEVO AG. To order parts see the parts list drawings at the end of this manual.  

 

Caution: check that the LEVO active-easy is not in the sitting position before carrying out 
any maintenance or repair work on the wheelchair’s stand-up mechanism! Risk of accident! 
Follow the instructions given in the relevant sections of the service manual! 

Summary of Contents for active-easy LAE



































Reviews: