manualshive.com logo in svg

Levo AG active-easy LAE, Instruction And Service Manual

Share
Download
Levo AG active-easy LAE Instruction And Service Manual Download Page 10

10

3.

 

Sitting / Driving

 

 
In the LEVO active-easy you will enjoy all the handling qualities and comfort of an active 
wheelchair. This section will tell you how to adapt the LEVO active-easy to suit your particular 
needs. Before attempting adjustments yourself, please consult your LEVO dealer.  
 
 
3.1. 

The rear wheels 

 
High pressure tires are fitted as standard on the LEVO active-easy. The diameter of the wheels 
depends on the height of the seat. Thanks to the quick-release axles, the rear wheels can be easily 
removed and set back in place (see photo left). 
 

   

 

 
 
 
3.2. Seat 

inclination 

 
The standard pre-set angle of inclination is 5° to the rear. By altering the height of the axle adapter 
it is possible to re-set this angle to anything between 0° (horizontal) and 8° to the rear (see photo 
above right). To ensure these alterations do not compromise safety in the standing position, the 
front wheel forks must be adjusted appropriately. 

These adjustments should only be carried out 

in consultation with your LEVO dealer!

 

 
 

3.3. 

Position of the rear wheels 

 
By re-setting the axle adapter either further forward or further back, you are able to increase or 
decrease respectively your LEVO active-easy’s tendency to tip over (see photo). To avoid accidents 
(tipping over) we recommend the fitting of anti-tip rollers (see accessories). 

Please consult your 

LEVO dealer! 

 

 

Summary of Contents for active-easy LAE



































Reviews:

No comments

Brands by name

Popular brands

Load more brands