Leviton PowerSwitch EDSR, Installation Instructions Manual

Page: 2 / 13

EDSR
Enclosed Disconnect Switch with Receptacle
(Figure 4)
NOTE: Receptacle sold separately.
• For use with 20A -30A NEMA Locking Receptacles and any mating NEMA 20A-30A
Locking Plug.
• The EDSR has an environmental rating of IP66, UL Standard 50 and NEMA environmental
ratings of 4X and 12K, when used with Leviton WETGUARD
TM
locking plugs. NOTE: If other
mating plugs are used the environmental rating is IP54 and NEMA environmental rating 3R.
PARTS LIST:
1.
Enclosure Base with Hinged Cover, Receptacle Mounting Bracket and the following DIN Rail
mounted hardware:
A. Rotary Switch 30A, 660V with
Normally Open Auxiliary Contact.
B. Terminal Blocks, Color Coded. Blue
terminal block is Neutral. Green/
Yellow terminal blocks are ground.
2. Inside Enclosure Base
A.
Grounding Bracket with Screw.
B. Four (4) Enclosure Mounting Feet
with Screws.
Note: Wall Mounting Hardware not
included.
3.
Six (6) 12” #10 AWG Leads (3 Black,
2 Green, 1 White) for internal wiring.
4. Adhesive-backed Ratings Label Sheets.
5.
20A
WETGUARD TM
seal replacement
(shown in Figure 6). 30A gaskets are
pre-assembled.
1
#10 AWG
Leads for
Internal
Wiring
Figure 1
Enclosure Bottom as Packaged
with Enclosure Open
Packaged
Mounting
Feet and
Screws
DIN Rail
Grounding
Bracket
Hinge
Receptacle
Mounting
Bracket