Overview
The Energy Monitoring Hub™ Data Acquisition Server is designed to allow owners and managers of commercial and
industrial facilities with a cost-effective means of gathering crucial information in a timely manner. To meet these
requirements, the Energy Monitoring Hub™ system provides the installer with all the tools necessary to install and
configure the hardware and software with a minimum of time and investment.
Installation Checklist
An Energy Monitoring Hub™ system installation has the following components:
Required hardware
Energy Monitoring Hub™ A8812 Data Acquisition Server (required)
Data connection (Ethernet).
Ethernet Cat 5 cable (required for LAN or direct laptop-to-Energy Monitoring Hub connection)
Optional hardware
Leviton Series 2000 and 3000 meters (Modbus RTU standard).
Analog sensors for temperature, humidity, etc.
Pulse output transducers for measuring gas, electricity, water, etc. from existing meters and sensors.
Next, choose one or more of the following connection methods.
For LAN installations only:
Ethernet 10/100Mbit connection point (hub or switch)
IP address and Netmask (check with system administrator)
Gateway address (check with system administrator)
DNS server address (check with system administrator)
HTTP Proxy address (optional), may be required if the Energy Monitoring Hub is behind a firewall (check with
system administrator)
Markings and Symbols:
WARNING: A potential risk exists if the operating instructions are not followed
General Warning Symbol: This symbol indicates the need to consult the operating instructions provided with the
product.
This symbol indicates the presence of electric shock hazards.
This symbol indicates: Do not apply to or remove from hazardous live conductors.
Direct Current symbol.
Shop for Power Metering products online at:
1.800.561.8187
www.
PowerMeterStore
.ca