User
Guide
Rev: A, 02 03 2004,.sw3.10
Page 41
Channel Options
The Channel Options configuration screen is used to control the
behavior of the individual channels or range of channels on a DMX
universe. These settings are used to describe the effects of two
scenarios, the first, what happens when a source signal is abruptly
removed and secondly what behavior shall occur when two
competing sources have the same destination (merging.)
Channel options can be set for each of the DMX output ports.
Figure 17: DLR Channel Options
1. DMX Output Port:
This describes which Output Port the
Channel Options apply to.
DMX P1
references
DMX Output Port
DMX P2
references
DMX Output Port 2
or
(B)
, etc. Depending
on your particular model of NPC, the listing of available ports may
vary.
2. Channel Option Settings:
This shows the particular options
set for particular ranges of channels for that particular port. The
first few characters depict the options for the specific numeric
range of channels located adjacent to the characters. The character
legend is as follows:
1
3
5
4
2
2