User Guide
Page 10
Installation
The installation and physical connections to the NPC should be
pretty straight forward and for many may be self explanatory.
However, here is a brief explanation of the required steps and any
important notes.
Physical Installation & Power
The NPC DLR has a variety of installation options which you can
choose depending on your particular needs.
First
, it can either be
used in table top applications or permanently installed surface
mount applications.
Second
, you can either use the internal
terminations or external terminations. And
Third
, the cover can be
installed in two orientations to either hide or make available the
external receptacles.
Observe clearances as required for proper device operation.
Front panel access for local configuration and visual status
indication, and rear access for connections. Be sure to leave
enough room for the connector!
Physical Installation
If the NPC DLR is to be used in a portable scenario or mounted to a
surface to which the DLR could cause damage, simply install the
supplied rubber feet to the bottom of the unit, one in each corner.
If the NPC DLR is to be permanently installed in a surface mounted
fashion, locate an area on your wall or other surface suitable for the
device and clear of obstructions, then use the keyholes on the back
to attach the device to the surface. Use screws suitable for your
particular application (
see figure 3 following
).