User
Guide
Rev: A, 02 03 2004,.sw3.10
Page 31
DEVICE CONNECTIONS
This page allows you to view the connection status of every port on
the NPC and on some can manually enable or disable the port. An
enabled device/port is said to be active and a disabled or non-
existent device/port is said to be inactive.
Figure 14: Device Connections
From the main menu, use the arrow keys to highlight the item
“device connections.”
Pressing the
[ESC]
button will bring up
the display shown in figure 4.3. This display shows the status of
inputs and outputs of this NPC. To make changes, simply use the
arrow keys to move the cursor to the desired item. Then, use
[TAB]
buttons to cycle through the available options. The available
options are listed below.
On all of the available connections below, the status column
will indicate either active or inactive. A port is active if either
the NPC detects presence of input signal on that particular port
or if the NPC is generating a signal on that particular port. If
the status of this port is not what you expect, first verify that
your patching at the NPC is correct. In the case of an input
port, verify that your input signal exists and is transmitting
data. If you are still having trouble, contact tech services.
A
C
B