14
3.6 Static IP Enabled Mode
Confirm the DAS is properly connected to the computer, and both are powered on.
3.6.1. On the EMB Hub, click the “Menu” button to select the “TCP/IP Config” option.
3.6.2 Click the “Select” button to enter the “TCP/IP Menu”.
3.6.3 Select the “DHCP+UPnP on/off” option by scrolling through options using the
“Menu” button and using “Select” button to enter.
3.6.4 Disable the DHCP+UPnP by clicking the “Menu” button, and navigating back
to the “TCP/IP Config” Menu.
3.6.5 Scroll through options (using “Menu” button) and select “IP Address” option
using the “Select” Button.
3.6.6 Confirm the IP address is 192.168.40.50
3.6.7 Scroll through the menu options and select “Previous Menu”, to return to the
home menu options. This change will require a reboot.
3.6.8 Click “Select” button to execute the reboot.
3.6.8.1 The DAS default network configuration is:
• IP
• Address: 192.168.40.50
• Netmask: 255.255.255.0
• Gateway: 192.168.40.1
3.6.8.2 Configure the computer with the following static IP settings:
• IP
• Address: 192.168.40.1
• Netmask: 255.255.255.0
• Gateway: 192.168.40.1
3.6.9 Open a browser and type the IP address, shown on the LCD display of the
EMB Hub, on the address bar.
3.6.10 This will open the web browser interface of the EMB Hub.
3.6.11 At initial setup a password must be created. Click on the “click here for
Password Setup” to create the admin user password.
3 INTERNAL COMPONENT CONFIGURATION AND OPERATION
Summary of Contents for A8810-41M
Page 2: ......
