Leviton A7810, Installation And Operation Manual

Page: 19 / 44

16
8 MODBUS
8.4 Device Configuration
When the “configure” button is clicked from the device details page, the screen will be refreshed, with the
same information, however the device name, alarm settings and console checkbox will be available.
Device Name: This field allows you to specify a name for the device such as “main building power” or other
useful name to indicate the location or function of the device. A name must be assigned to a device before
the EMB HubLite will log data for it.
Low Alarm, High Alarm: Specify a threshold for the alarm. If the data point is recorded below the Low
Alarm, or above the High Alarm levels at the time a log entry is taken, the point will be considered in an
alarm state.
Console: Checking this checkbox will cause the EMB HubLite to display this data point on the
LCD console. Multiple data points are rotated about every 10 seconds. The values on the LCD console are
updated when the next log interval occurs.
Point Config: Some devices have configurable point features. Most data points are automatically
configured and this option may not be displayed.
Advanced: At the lower right corner of the page, an advanced configuration button may be present
depending on the Modbus device features.
8.5 Advanced Configuration Options
The advanced configuration page contains special options specific to the device you are configuring. For
the onboard pulse inputs, the configuration options are shown below. The device serial number and other
specific parameters will be displayed if available.
Specific options available in the Advanced Configuration page vary depending on the features available in
the Modbus Device, as well as the features implemented in the built-in EMB HubLite driver.
WEB
VERSION