LevelOne WAP-0005 User Manual Download Page 68

Page: 68 / 94

Other Settings & Features

Firmware Upgrade

The firmware (software) in the Wireless Access Point can be upgraded using your Web
Browser.

You must first download the upgrade file, and then select

Upgrade Firmware

in the

Manage-

ment

section of the menu. You will see a screen like the following.

Figure 55: Firmware Upgrade Screen

To perform the Firmware Upgrade:

1. Click

the

Browse

button and navigate to the location of the upgrade file.

2. Select the upgrade file. Its name will appear in the

Upgrade File

field.

3. Click

the

Upgrade

button to commence the firmware upgrade.

The Wireless Access Point is unavailable during the
upgrade process, and must restart when the up-
grade is completed. Any connections to or through
the Wireless Access Point will be lost.

Summary of Contents for WAP-0005































































































Search results

Summary of Contents for WAP-0005

Reviews:

Related manuals for WAP-0005

Brands by name

Popular brands

LevelOne WAP-0005, User Manual

Search results

Summary of Contents for WAP-0005

Reviews:

Related manuals for WAP-0005

Brands by name

Popular brands