background image

IES-0853 User Manual 

Page 4 

Overview 

Hardened Web-Smart PoE Ethernet Switch 

 

 

 
LevelOne IES-0853 Industry Ethernet Switch provides 4 PoE ports of 10/100Base-TX plus 3 
ports of 10/100Base-TX Ethernet plus 1 port 100FX Multimode SC fiber to enable high 
speed network at mission-critical environment. This device is designed to be mounted on 
an industry standard DIN-rail, plus the clearly visible status LEDs provide simple 
monitoring of port link activity. 
 

High Reliability 

All components are built to withstand harsh environment applications without 
compromise where humidity, temperature variation and even shock vibration are 
concerns, including Electric & Utility, Critical Infrastructure, Transportation and 
Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) 
temperature. 
 

Web Management 

Web-based GUI management features implementation of Port-based VLAN, IEEE802.1p 
QoS, Prioritised DSCP, set up Admin Password with ease. Plus, the Power over Ethernet 
ports can be On / Off and limits the power budget remotely 
 

Power over Ethernet 

This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3at 
PoE standard at maximum 30W power budget per port. It helps to save infrastructure 
wiring costs dramatically by eliminating electric wiring and less UPS needed. Also, it is 
compatible with IEEE802.3af standard PD devices. 
 

Safety 

This device has been tested under UL508 standard for Industrial Control Equipment to 

highly reliability and safety measurement to ensure field hardened, especially for the harsh 
environment. 

 

Summary of Contents for IES-0853






















Reviews: