LevelOne GES-2450, User Manual

Page: 15 / 94

Web Smart Switch
15
ports.
MAC Filtering
This sub-menu takes you to screens where you can
configure the accessed MAC address.
802.1X
This sub-menu takes you to screens where you can
configure IEEE 802.1x port authentication for clients
communicating via the switch.
Port Security
This link takes you to a screen where you can configure the
port security setting.
Protected Ports
This link takes you to a screen to setting and revising the
protected ports.
Access This link takes you a way to access the switch.
ACL
ACL Setting
This link takes you to a screen to setting and revising the
basic setting of ASL.
ACL Template Setting
This link takes you to a screen to setting and revising the
template setting of ASL.
ACL Index Range Setting
This link takes you to a screen to setting and revising the
index range setting of ASL.
ACL Policy Setting
This link takes you to a screen to setting and revising the
policy setting of ASL.
QoS
Port-based Priority
This link takes you to a screen where you can assign a IEEE
802.1p priority to packets based on the ingress (incoming)
port of the packet.
802.1p-based Priority
This link takes you to a screen where you can assign a IEEE
802.1p-based priority to packets based on the ingress
(incoming) port of the packet.
DSCP-based Priority
This link takes you to a screen where you can assign priority
to packets based on their Differentiated Services Code
Points (DSCPs).
Priority to Queue Mapping
This link takes you to a screen where you can configure the
priority level-to-physical queue mapping.
Packet Scheduling
Packet Scheduling is used to help solve performance
degradation when there is network congestion. Use this
screen to configure queuing algorithms for outgoing traffic.
Queue Weight Setting
This link takes you to a screen where you can assign a
queue weight to packets based on the ingress (incoming)
port of the packet.
QoS Remarking Status
This link takes you to a screen where you can assign a QoS
remarking status to packets based on the ingress (incoming)
port of the packet.
QoS Remarking Table
This link takes you to a screen where you can assign a QoS
remarking table to packets based on the ingress (incoming)
port of the packet.
Management
SNMP
This link takes you to a screen where you can set and revise
the SNMP.
Diagnostics
Ping Test This link takes you to a screen where you can do Ping test.