Web Smart Switch
35
Aggregated
This field displays the ports that aggregated in a trunk group.
A static trunk would be aggregated immediately; an LACP trunk exchanges
LACP PDU to link partner to aggregate.
Delete
Click this button to delete the trunk.
3.3.3.2 LACP
Click
Switching
>
Trunk
>
LACP
to display the screen shown next.
LACP: Link Aggregation Control Protocol.
Note: Do not configure this screen unless you want to enable dynamic link aggregation.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
LACP Enable
Select
Enable
from the drop down box to enable Link Aggregation
Control Protocol (LACP). Select
Disable
to not to use LACP.
System Priority
LACP system priority is a number between 0 and 65,535. The switch with
the lowest system priority (and lowest port number if system priority is the
same) becomes the LACP “server”. The LACP “server” controls the
operation of LACP setup. Enter a number to set the priority of an active
port using Link Aggregation Control Protocol (LACP). The smaller the
number, the higher the priority level.
Apply
Click
Apply
to save your changes to the Switch.
Summary of Contents for GES-2450
Page 22: ...Web Smart Switch 22...
