Web Smart Switch
92
The following table describes the labels in this screen.
LABEL
DESCRIPTION
User name
Enter your user name for new account.
Password Type
Select password type for new account:
Clear Text:
Password without encryption.
Encrypted:
Password with encryption.
No Password:
No password for new account.
Password
If the password type is not “No Password”, the password must be
specified.
Retype Password
Retype password to make sure the password is exactly you typed before
in “Password” field.
Privilege Type
Select privilege level for new account:
Admin:
Allow to change switch settings.
User:
See switch settings only. Not allow to change it.
Apply
Click
Apply
to save your changes to the switch.
Modify
Click
Delete
to modify any configuration.
3.9.5 Enable Password
This page allow user to modify the enable password. In command line interface, user can use
“enable” command to change their privilege level to “Admin”. After “enable” command is issued,
user need to type the enable password to change their privilege level.
Click
Maintenance
>
Enable Password
in the navigation panel to display the screen as shown
below.
Note
: It is highly recommended that you change the default password.
Summary of Contents for GES-2450
Page 22: ...Web Smart Switch 22...
