Level One Printer Servers
Problem No. 5
When printing from some software applications such as Power
Point, it takes a long time and the print out is incorrect.
Solution No. 5
The problem is due to the printer, which is being configured to
Start
printing after the first page is spooled
. To change this setting:
•
Go to
Control Panel - Printers
and click on your printer.
•
Then select
File - Properties - Details
.
•
When the Details screen appears, click the
Spool Settings
button.
•
When the Spool Settings dialogue box appears, choose
Start
printing after last page is spooled
and click OK.
Problem No. 6
The Configuration button on the Printer Status screen in BiAdmin is
grayed out, even though my printer is bi-directional.
Solution No. 6
The button is unavailable if the printer is busy. You must wait until the
printer is idle.
Problem No. 7
My old printer cannot print or prints garbage.
Solution No. 7
If the printer you used is an old model with low speed, the following
steps may solve this problem:
Try the following:
•
Open the BiAdmin Utility.
•
Click the
Printer Status
icon.
•
Change the Printer Type setting to
Low Speed
or set the Handshake
Signal setting to
Ack & Busy
.
- 60 -
