Figure 4: LevelOne Printer Server Screen
3. Click
Next
on the first screen of the Wizard, to view a list of LevelOne Printer Servers on
your LAN.
4. Select your new LevelOne Printer Server, then click
Next
to continue.
5. Enter the required data on the following screen.
•
Name of the LevelOne Printer Server can be changed if you wish.
•
Comment is optional.
•
Select or enter the Workgroup name for this LevelOne Printer Server.
6. Click
Next
to configure the
TCP/IP Screen
:
•
Select
Obtain IP Address automatically
if your LAN has a DHCP Server, otherwise
select
Fixed IP Address
.
•
For
Fixed IP Address
, enter an unused address from the range used on your LAN, or
click the
Suggest New Values
Button.
Use the same
Network Mask
and
Gateway
as PCs on your LAN.
7. Click
Finish
to save the data to the LevelOne Printer Server.
Note: To install the Wizard on your PC, use the "Installation" option.
If the desired LevelOne Printer Server is not listed:
•
Check all cables to the LevelOne Printer Server.
•
Check the LevelOne Printer Server's LEDs:
The Red LED should be OFF and the Green LED should be ON or flashing.
- 9 -
