Level One Printer Servers
Figure 12: Print Port Setup (Peer-to-peer Printing)
If your LevelOne Printer Server is not listed:
•
Click the "Refresh" button.
•
Check that both the LevelOne Printer Server and the printer are properly
connected, and powered on.
•
Check that the LevelOne Printer Server has been configured. (Use the
Setup
Wizard
on the CD-ROM.)
•
If using TCP/IP, try installing the NetBEUI protocol. (See the earlier section
Checking your Network Protocols
for details.). Then try again.
2. Select the desired port on a LevelOne Printer Server, then click
Next
. A pop-up message
will inform you if the port has been created successfully.
If you see the following error message, either install Internet
Explorer 4 or later, or follow the procedure in the "Trouble
Shooting - Windows" section of Chapter 8.
3. The printer port will be created, then a screen like the following will be displayed.
- 16 -
