Level One Printer Servers
Menus
Main Menu
Device Status
Same as
Device
Icon.
Printer Status
Same as
Printer Status
Icon.
Configure
Same as
Configure
Icon.
Upgrade
Same as
Upgrade
Icon.
Refresh
Same as
Refresh
Icon.
Exit
Same as
Exit
Icon.
InitDevice Menu
Reset Device
This will cause the device to reboot. This should be done after
making any configuration changes, or if the device stops responding
after some problems.
Restore to Factory
Default
This will restore ALL device values to their factory defaults. To
restore only the current screen, use the
Set to Default
button on the
screen.
Attached Remote
This is used to connect to a LevelOne Printer Server device on
another LAN segment. You need to know the IP address of the
remote LevelOne Printer Server.
If your LAN does not have a Router, you can ignore this option.
Connected
Protocol
This option allows you to designate which LAN protocol will be used
for communication between the selected device and this application.
You should select ONE protocol only.
Diagnostics menu
Print Test Page
Use this option to print a test sheet from the selected LevelOne
Printer Server port. The test print out will include status information.
Configuration
When the
Configuration
icon is clicked, or the
Configure
option on the
Main
menu is selected,
a tabbed window will open. The tabs available will vary depending on the LevelOne Printer
Server model selected. The possible tabs are:
•
System
•
TCP/IP
•
AppleTalk
•
NetBEUI
•
Internet Printing
•
Port
•
NetWare
- 28 -
